Full Automatic Washing Machine
with Pump
User's manual
This manual is for
HWM55-10
Please read this manual
carefully before using.
0030806972C
Retain it for future reference.
Names of the parts
Top lid A
Water valve
Top lid B
Water absorption cushion
Cabinet handle
Detergent box
Lint filter
(Installed by user)
Control panel
Filter cover
Inner tub
Drain hose
Pulsator
Control panel film
Adjustable foot
Fixed foot (3)
Cabinet
ase frame
ack cover
Meaning and description of the symbols
Contents marked with that symbol are related to the
safety of the product and the personal safety of the
users. Please operate in strict conformity to the contents,
otherwise it may cause damage of the machine or
injure the personal safety of the user.
Warning sign
Contents marked with that symbol are actions forbidden
to perform. Performing of those actions may result
in damage of the machine or injure the personal
safety of the user.
Forbidden sign
1
Safety precautions
The power cord plug should be convenient
Please plug the plug on special receptacle
with rated voltage. Be sure to use single-
phase three pins receptacle. Ensure the
earthing prong of the power receptacle is
earthed reliably. Use leakage protector if
possible.
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to ins-
ert or pull out the power plug.
Do not damage the power cord, bend , extend, twist, bind or alter it by force.
Do not press or nip it with weight. If the power cord or the power plug is bad,
or the power plug becomes flexible, to avoid risk it is required to have it replaced
by the technicians of our special shop or the after-sale service department.
Keep the pin of the power plug clean, if the power plug is polluted
with dust, please wipe with dry cloth carefully.
Do not put the machine at damp place like
Do not use water hotter above 50 C .
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
The ventilation holes
at the bottom
soft items
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
2
Safety precautions
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children. Do not let the children
climb the washing machine.
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
r
Petrol
Thinne
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
To prevent the lint inside the tub from blocking
the cascade outlet during washing, please
keep the lint filter in good condition, and
Toprotect your laundries and wash-
ing machine, please take out all of the
coins, buttons, sand, hairpin and
other foreign materials before washing.
install it to proper position. If the lint filter
is lost or damaged, please contact the local
after-sales service department of our company.
Please check if the water faucet is open,
and if the connection of the water inlet
pipe is proper.
It is suggested to use foamless washing
powder.
Install
Dismantle
3
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the bottom plate
Install the lint filter
After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the
machine with the eight screws by a cross
screwdriver, then lift the machine up gently.
See to the figure:
Push the lint filter downward to
location for lint filter.
Front
Back
Soft items
Screw
Bottom plate
Adjust the installation position
The largest allowed slope of the
shank base of the machine is 2
.
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
adjustable nut
Fasten
adjustable foot
Loosen
High
Low
2.Fasten the nut after adjustment.
4
|